T-works Robot Machine 200 ton Hydraulic Piling Machine with Fast
Piling Speed
1, Description:
Hydraulic Static Pile Drivers are featured with no noise, no
vibration, no pollution and no rubbish left in construction site.It
can work with H-piles, precast concrete and steel piles with
different shapes,like round,square and tapered shape. There are
series models range from 60T to 1200T.
It is adopted the hydraulic system design of large power and high
flow,the precast pile entirely depends on the hydraulic static
pressure so that the pile can be pressed into the ground steadily
and quietly.
The pressing-pile speed amounting to 300-800 meters within 8hours, which it's quite more efficient than other conventional pile
drivers.This unique construction method with non-pollution has
gradually taken place of the pile hammer.
2, Applications:
No limitation on pile length. Suitable for construction in clay
soil, soft soil and sand bed foundation, or in the Karst areas with
low earth covering, or by riversides, or in coastal areas with deep
bearing stratum.
No noise, No pollution during construction, especially suitable for
operations in areas with noise control such as schools, social
communities, and urban areas.
No vibrations. Suitable for vibration-control areas such as
subways, overpass, dangerous buildings, precision instrument
buildings and those nearby banks.
3, Specifications:
| Parameter/Model | ZYC200 |
|---|
| Rate piling pressure(KN) | 2000 |
| Piling speed(m/min) | Fast | 11.0 |
| Low | 2.7 |
| Piling stroke(m) | 1.9 |
| Pace(m) | Longitudinal | 2.4 |
| Horizontal | 0.6 |
| Angle range(°) | 15 |
| Rise stroke(m) | 1.6 |
| Square pile(mm) | Max | 500 |
| Circle pile(mm) | Max | 500 |
| Side piling(mm) | 450 |
| Corner piling space(mm) | 900 |
| Lifting weight(t) | 8.0 |
| Pile hanging length(m) | 12 |
| Power(KW) | Piling | 60 |
| Lifting | 22 |
| Main dimension(m) | Work length | 9.9 |
| Work width | 5.5 |
| Transpot height | 3.0 |
| Total weight(t) | 200 |
4, Feature Advantage:
Except for the general technology performances of the same grade
products by domestic HSPD manufacturer, T-works pile driver is of
yet some unique original technologies as follows.
1. Unique top-jacking design. Tali HSPD can be applied by not only
clamping but also jacking or the two simultaneously. This mode can
reduce the clamping stress effectively to avoid damaging the hull,
especially of the thin-well pipe piles.
2. Original structure design of lifting leg. This features has
changed the supporter of radial force from the lifting cylinder of
pile driver during longitudinal walking. By this way, it is
possible to avoid the damage of the lifting cylinder rod and the
guide thimble, improving resistance to strain injury, impulsion,
and weariness greatly.
3. Practical clamping mechanism. It can meet the needs of square
pile, pipe pile and H-type steel pile only by changing the
grippers. The grippers can adjust its orientation according to the
pile surface to ensure enough contact to the pile, and to avoid
pile damage.
4. Ingenious conception in the design of the border and corner pile
mechanism. The border and corner piling force can reach 60%-70% of
center piling force.
5, Basic Structure Of Hydraulic Press In Pile Driver
